TECHNICAL PARAMETERS:

• External lenght: 7 260 mm
• Internal lenght: ~ 5 200 mm
• External width: 2 550 mm
• Internal width: ~ 2 420 mm
• Height of side board: ~ 800 – 900 mm
• Height of drawbar: 900 mm
• Drawbar eye: Ø50 mm
• Cubatures: ~ 10,06 – 11,3 m3
• Load capacity: 12 050 kgs.
• Maximum Gross Weight: 18 000 kgs.

FRAME:

• made of constructional steel with enhanced strength S355J, shot blasted and degreased, and then is painted by high-quality polyurethane lacquers in graphite RAL 7021 or black RAL 9005 colour,
• 1 landing leg at the drawbar - tilt,
• rear bumper tilt.

AXLES, SUSPENSION:

• 2 SAF/BPW axles with technical load capacity 9 000 kgs. each,                   
• pneumatic suspension,
• automatic brake levers AGS for version with drum brakes axles.

BRAKE SYSTEM:

• disc brakes axles SAF Intradisc Ø430 ET120 / drum brakes axles BPW Eco Plus 420x180 mm.

PNEUMATIC SYSTEM:                

• double - wire pneumatic brake lever consistent with ECE, EBS KNORR-BREMSE 2S2M anti-block system,
• EBS plug, pneumatic junction: yellow and red, mounted on the drawbar,
• parking brake – tristop cylinders on the rear axle,
• pressure manometer,
• H-S platform levelling valve.

WHEELS:

• tyres 385/65 R 22,5 [SAVA] – 4+1 pcs.,
• steel wheel rims.

LOADING BODY:

• pernament front wall H=1 000 mm, made of steel sheet S355J, thickness 3 mm,

• side walls H=900 mm, made of steel sheet S355J, thickness 3 mm,
• rear closure tilt flap,
• aside rolled tarpaulin 680gr/m² in a colour selected by the Customer, rolled front-back,
• platform painted in a colour selected by the Customer, according to RAL palette,
• floor made of steel sheet S355J, thickness 4 mm,

HYDRAULICS:

• Binotto, placed under the box.

WIRING SYSTEM:

• 24V, consistent with traffic regulations and ECE, 2 plug-in sockets [2x7pin] mounted on drawbar,
• rear lights unit [reversing and antifog lights, direction indicators, reflective triangles],
  • lighting of license plate,
  • outline lights,
  • orange lateral lights.

OTHER EQUIPMENT:

• spare wheel carrier – 1 pc.,
• plastic toolbox [250x250x500 mm] with equipment [2 wheel wrenches, warning triangle],
• wheel wedges – 2 pcs.,
• distinctive boards – 2 pcs.,
• plastic mudguards, rear with mudflaps – 6 pcs., 
•  side aluminum protection consistent with ECE,
• marking vehicles consistent with 48 ECE.